Miranda RCP-100 Especificações descarregar pdf (Página 10)

GUIDE TO INSTALLATION AND OPERATION

6 | RCP-100

Case 2 (figure 3.5)

In this case, multiple RCP-100s are connected on the LAN. Only one of these can be configured as a

SERVER; all others must be configured as CLIENTs.

Figure 3.5 Multiple RCP-100 Installation

Here are the settings for this set-up, where:

• the IP address of RCP-100 #1 (server) is 10.2.5.10

• the IP address of Densité #1 is 10.2.5.11

• the IP address of Densité #2 is 10.2.5.12

• the IP address of Densité #3 is 10.2.5.13

• the IP address of RCP-100 #2 (client) is 10.2.5.20

• the IP address of RCP-100 #3 (client) is 10.2.5.21

Settings for RCP-100 #1 (server)

IPADDR: 10.2.5.10

SERVICE CONFIG – ICOM: ON

DCOM: ON

DSRV: ON

DSRV IP: 10.2.5.10

Settings for RCP-100 #2 (client)

IPADDR: 10.2.5.20

SERVICE CONFIG – ICOM: OFF

DCOM: OFF

DSRV: OFF

DSRV IP: 10.2.5.10 (the IP address of the server, i.e. RCP-100 #1)

Settings for RCP-100 #3 (client)

IPADDR: 10.2.5.21

SERVICE CONFIG – ICOM: OFF

DCOM: OFF

DSRV: OFF

DSRV IP: 10.2.5.10 (the IP address of the server, i.e. RCP-100 #1)

Within the ±5 IP address range

around the server IP address

Outside the ±5 IP address range

around the server IP address

reserved for Densité frames

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

Sem comentários

Miranda RCP-100 Especificações Página 10