Miranda Kaleido-X Instruções de Operação descarregar pdf (Página 26)

Setting Up Your Multi-Viewer

Networking Setup

Changing an IP Address on Windows XP

To change the IP address of a client PC that has Windows XP

1On the Start menu, point to Control Panel, right-click Network Connections, and then

click Open on the menu.

2In Network Connections, right-click Local Area Connection, and then click Properties

on the shortcut menu.

3In Local Area connection Properties, select Internet Protocol (TCP/IP) from the list on

the General tab, and then click Properties.

The Internet Protocol (TCP/IP) Properties window opens.

4On the General tab, click Use the following IP address.

5 Type an IP address in the same range as the multiviewer’s current IP address.

For example, if the multiviewer’s IP address is 10.0.3.70, then the IP address of your

client PC could be 10.0.3.123. If you are unsure, contact your network administrator.

6 Type a subnet mask in the same range as that of the multiviewer.

7Click OK.

8In Local Area Connection Properties, click Close.

Configuring an Audio Bridge Terminal

The optional Audio Bridge Terminal (ABT) is an external audio multiplexer/serializer for the

Kaleido-X. The Kaleido-X supports audio channel inputs from the ABT-64 or ABT-128 series

of Audio Bridge Terminal panels through up to two SDTI inputs. The ABT-64 supports

channels and the ABT-128 supports 128 channels.

There is not enough space on the Kaleido-X rear panels to also include discrete audio

connectors. An ABT provides connector space for multiple audio signal inputs, and

multiplexes all the audio signals into combined serial feeds on coaxial cables that connect

to the KXI cards.

Note: The ABT is powered through the RJ-45 Ethernet connector. There is

no power ON/OFF button, so the device is ON whenever a powered Ethernet

cable (PoE) is connected.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 38 39

Sem comentários

Miranda Kaleido-X Instruções de Operação Página 26